Skip to content
Construction Plan Central
Complimentary estimate

Southern California Construction Plan Cost Calculator

Estimate Construction Plan Central’s fees for design drawings and structural engineering for your Southern California project. Use the estimate to budget for your construction plans before requesting a reviewed quote. Ranges come from comparable residential projects our team has worked on, and include Title 24 energy compliance.
STEP 1Your project
What are you planning? (choose all that apply)
Other projects
Worked example

Example construction plan estimate

What the calculator showed on November 17, 2026 for a detached ADU in the City of San Diego. Enter the same answers above to see today’s range.

Project type
A backyard unit (detached ADU)
Jurisdiction
City of San Diego
Square footage
800 sq ft of new space
Estimated plan fees
$6,500–$13,500 (typical $10,477)
Design and engineering
about 80–125 hours of design and engineering
Based on
Our latest 82 new-building projects, priced from the 11 closest matches

What we include

  • Design drawings and build-ready construction documents
  • Structural plans and calculations stamped by a California-licensed engineer
  • Title 24 energy compliance
  • Plumbing fixture, electrical panel, and equipment locations on the plans (full MEP design is separate)
  • A set put together for submittal to your jurisdiction
  • Responding to the city’s plan-check comments on our drawings, and resubmitting

What the owner budgets separately

  • Construction
  • City plan-check and permit fees, and permit processing
  • Full mechanical, electrical, and plumbing (MEP) design, contracted separately when your project needs it (ask us)
  • Grading, drainage, and retaining walls (ask us)
  • Surveys and soils reports
  • HOA approval (the owner’s responsibility)
Questions

Construction plan costs, answered

How much do construction plans cost in Southern California?

For the residential projects our team works on, design drawings, structural engineering, and Title 24 together usually come to $6,500 to about $25,000, depending on the project. New homes over 2,500 sq ft are priced by size, so a larger home costs more. Structural engineering alone, for drawings by your own designer, starts at $2,500. Here is what the calculator showed on November 17, 2026 for projects in the City of San Diego:

ProjectSizeEstimated plan fees
Garage conversion400 sq ft$5,765–$9,000
Unit inside the house (JADU)500 sq ft$6,500–$9,500
Remodel that removes walls1,500 sq ft house$6,500–$9,000
Room addition400 sq ft on a 1,500 sq ft house$6,500–$12,500
Detached ADU800 sq ft$6,500–$13,500
Attached ADU600 sq ft$6,500–$17,000
New home2,500 sq ft$10,500–$24,500
New home (priced by size)4,000 sq ft$18,000–$32,000

Construction, city fees, and outside consultants are separate. Your own range depends on your project, your lot, and your city.

What does the estimate include?

One coordinated set from one team: design drawings and construction documents, structural plans and calculations stamped by a California-licensed engineer, and Title 24 energy compliance, put together for submittal to your jurisdiction. Cities send plan-check comments on nearly every set; responding to the comments on our drawings and resubmitting is included. Plumbing fixtures, the electrical panel, and equipment are located on the plans; full MEP design is a separate contract when a project needs it.

Not included: construction, city plan-check and permit fees, permit processing, surveys, soils reports, grading, drainage, retaining walls, and HOA approval (the owner’s responsibility). We never promise permit approval or timing; cities set their own reviews.

What changes the cost of design drawings and structural engineering?

Size and scope
More new or converted space, a second story, or several projects at once (an ADU plus an addition, for example) means more drawings and more engineering.
Structural changes
Removing walls, adding a story, long beams, and new foundations take more engineering than an interior layout change.
Your existing house
Remodels, additions, and conversions start with measuring and drawing what's there. Older or altered houses take longer.
Your lot and jurisdiction
Hillside, coastal, historic, and fire-hazard areas can add design work, reports, and review steps. Each city has its own requirements.
Design changes
Changes after you approve the schematic design are additional services, because they ripple through the design, structural, and Title 24 work.
Outside consultants
Surveys, soils reports, grading and drainage, and full MEP design are separate when your project or your city needs them.

Ready for a reviewed quote?

Run the calculator above, then request a reviewed plan quote. We look over your project and confirm the scope and the fee, usually within 2 business days. Have plans or photos already? Upload them here.